11.1V 3S 25C Li Po Battery Charger for RC Helicopter Airplane Drones Product Details
Key Specifications/Special Features:
11.1V 3S 25C Li Po Battery Charger for RC Helicopter Airplane Drones
Charging the cell initially with constant current at 0.5C and then with constant voltage at 4.2V till charge current declines to 0.05C.
80% or more of 1st cycle capacity at 0.5C discharge of operation.
After the standard charging, storied the cells under the condition as No.6.4 for 28 days, then measured the capacity with 0.5C till 3.0V, residual capacity>90%.
After standard charging, fixed the cell to vibration table and subjected to vibration cycling that the frequency is to be varied at the rate of 1Hz per minute between 10Hz and 55Hz, the excursion of the vibration is 1.6mm.
The cell shall be vibrated for 30 minutes per axis of XYZ axes. (No leakage No fire )
Cautions in use:
To ensure proper use of the battery please read the manual carefully before using it. Handling
Do not expose to, dispose of the battery in fire.
Do not put the battery in a charger or equipment with wrong terminals connected.
Avoid shorting the battery
Avoid excessive physical shock or vibration.
Do not disassemble or deform the battery.
Do not immerse in water.
Do not use the battery mixed with other different make, type, or model batteries.
Keep out of the reach of children.
Battery must be charged in appropriate charger only.
|Charge current||Standard Charge 0.2C|
|Standard discharge current||Constant current 0.2 C end voltage 3.0V|
|Discharge cut-off voltage||3.0V|
|Charge cut-off voltage||4.2V|
|Operating temperature||Charging: 0ºC-45ºC|
|Storage humidity||≤75% RH|
|Standard environmental condition||Temperature: 23±5ºC|
Primary Competitive Advantages:
Small Orders Accepted
Country of Origin
Main Export Markets:
Payment Terms:Telegraphic Transfer (TT,T/T)
Minimum Order:100 Pieces
FOB Range: US$ 5 - US$ 8 per unit (Pieces)
Lead Time: 10 - 15 days
Units per Export Carton: 100
Export Carton Dimensions L/W/H: 25 × 30 × 35 Centimeters
Export Carton Weight: 10 Kilograms
Size can be made according to your application space. Please check the details with our engineer by contact us at:
Tel: +86 186 6567 6364