E-bike Battery, High Quality, Portable and Smart

E-bike Battery, High Quality, Portable and Smart Product Details

Key Specifications/Special Features:

Key specifications/special features:
CE/UL/PSE approved chargers for E-bike battery, high quality, portable and smart

Technical data: 
 
Input voltage: 100-240V AC
Input current: 3.4A (maximum)
Output power:29.4V 3.4A
Frequency: 50-60Hz
Efficiency: Energy star level VI (V2.0)
Output voltage tolerance: ±5%
Output power: 100W (maximum)
LED indicator: yellow
Leakage current: less than 5mA
Standby power: less than 0.5W
Ripple and noise: less than 120Mv at full road with 20MHz bandwidth
Turn on delay time: less than 3S (AC: 110V and full load)

Specifications:
Environmental:

Operating temperature: 0 to 40 at maximum load
Storage temperature: -20 to 60
Humidity: 5 to 95% RH non-condensing

Mechanical:
Weight: 550g
Dimensions: 154*62*38mm
Connector: C8 C6 C14

Key specifications/special features:

Chargers in HCT are with UL/TuV/PSE/GS/CE/FCC and MET marks
HCT chargers can be used for toys, RC cars, air soft guns, portable device, pos machine, scanners, LED and other portable machines
Multiple currents universal fast and smart charger for any NiMH/NiCd battery pack from 9.6 to 18V
100 to 240V AC input for Worldwide voltage supported
Automatically detect battery packs voltage
Red LED: will be on during charging
Automatically cut-off by negative delta V when battery pack gets fully charged
Two current levels
Safety protection
Temperature sensor to avoid the battery from being damaged by over-heating
Safety timer controlled
Short-circuit protection
Input voltage: 100 to 240V AC, 50/60Hz
Output voltage: 24V
Charging current range: 500 to 1,800mA

Primary competitive advantages:
Reputation
Service
Small orders accepted
Country of origin
Green product
Guarantee/warranty
Packaging
Price
Product features
Product performance
Prompt delivery
Quality approvals