how to make battery bicycle DIY panasonic e bike battery

- Feb 03, 2017-

Product Description

how to make battery bicycle DIY panasonic e bike battery

ItemStandardRemark
Model36V10AH Pack 
Configuration18650-10s5p 
Nominal Voltage36.0V 
Typical Capacity10.0±0.20AH@0.20C Discharge
Internal Resistance≤150 mΩ 
ChargeModeCC/CV 
Voltage43.8±0.20V±0.10V
Current≤ 5.00A 
Temperature0ºC~+45ºC 
DischargeStandard Working Current10.0A 
Max. Continuously Discharge Current50.0A 
Peak Discharge Current80.0ALast for 5-20ms
Discharge End Voltage30.0V 
Temperature-20ºC~+60ºC 
ProtectionOver-Charge; Over-discharge; Over-current; Balance Function; Temperature Protection
Storage Temperature Range+15ºC~+25ºC 
Relative Humidity5%~85% 
Dimensions95*325mm (or OEM)±2.00mm
Weight3.0Kg±0.30Kg
Case MaterialAluminum Alloy 
Terminal TypeSee Following Pictures 

Do not use or leave the battery at very high temperature conditions(for example, strong direct sunlight or a vehicle in extremely hot conditions). Otherwise, it can overheat or fire or its performance will be degenerate and its service life will be decreased.
Do not use it in a location where is electrostatic and magnetic greatly, otherwise, the safety devices may be damaged, causing hidden trouble of safety.
If the battery leaks, and the electrolyte get into the eyes. Do not wipe eyes, instead, rinse the eyes with clean running water, and immediately seek medical attention. Otherwise, eyes injury can result. 
If the battery gives off an odor, generates heat, becomes discolored or deformed, or in any way appear abnormal during use, recharging or storage, immediately remove it from the device or battery charge and stop using it.
In case the battery terminals are dirt, clean the terminals with a dry cloth before use. Otherwise power failure or charge failure may occur due to the poor connection with the instrument. 
Be aware discharged batteries may cause fire; tape the terminals to insulate them.