Lithium battery module
At present, due to the different requirements of various automobile manufacturers in the market, almost no one of the modules and the production process is the same, and this is also on the automatic production line to put forward more requirements. Good automation production line in addition to meet the above hardware configuration and process requirements, but also need to focus on compatibility and the whole line of time".
Because the module is not fixed, so the electrical core, shell, PCB board, connecting piece and so on may change, the production line compatibility also appears especially important. For the current battery industry, automation module requirements are relatively high, because the complexity of the process, the requirements of the working environment, obviously application of robot and special equipment advantage.
PACK is the meaning of packaging, packaging and assembly, the process is divided into three parts, processing, assembly, packaging. PACK production line generally only need to assume two functions: transmission and detection. At present, the manufacturers generally used a semi-automatic PACK assembly line, mainly for the PACK of the line, off the assembly line, detection, in plant transmission and packaging.
Among them, the AGV car, the power assist robot arm, the roller line, the lifting arm and so on are all simple and effective tools. Due to the flexibility of the line can not be separated from the manual work can not be separated from the manual, so the semi automatic PACK is the mainstream of the current configuration of the manufacturers. With the development of industry change rapidly, more and more customers will require MES system and PACK module are integrated together, in order to better management and rapid query, which is for system integrators and is not a small challenge.
Tel: +86 186 6567 6364